Release notes

CM21-925

[ADD] Software update can be done via swupdate command

CM21-968

[ADD] Configurable to get reply on http instead of SMS, to enable longer replies

CM21-1044

[FIX] If HTTP response is enabled without APN set replies could be blocked. Add fallback and timeout

CM21-887

[ADD] Software downgrade is blocked

CM21-907

Changed default email report timeout to 60 seconds

CM21-908

Changed default FTP report timeout to 60 seconds

CM21-882

[FIX] Improved stability in report sending over HTTP and Email

CM21-1040

[ADD] Possibility to configure max length of SMS replies

CM21-1044

[FIX] If HTTP response is enabled without APN set replies could be blocked. Add fallback and timeout

CM21-1037

[ADD] Support for TLS 1.3

[ADD] Updated to chunked uploads over plain HTTP

[FIX] HTTP timeouts for CAD synchronisation to prevent requests from remaining open indefinitely

[ADD] Support for TLS Server Name Indication (SNI)

CM21-878

Fixed production issue with CMe2100 LTE hardware revision R1G and previous firmware.

CM21-875

Update firmware to support new hardware for CMe2100 LTE rev 1G

CM21-867

Update firmware to support new alternative component

CM21-842

Fixed issue where the application failed to start up on devices from factory

CM21-859

Added meter license (LC) to list of information when scanning device using NFC, e.g.

CM21-857

Improved handling of NFC read/write error

CM21-824

Fixed issue where the CMe2100 GPRS does not start up correctly on HW R1G.

CM21-810

Support hardware version R1F for CMe2100LTE

CM21-809

[Solved] Application does not start on CMe2100LTE R1E

CM21-733

Change default timesync to random pattern

CM21-585

SMS Center Number Configuration

CM21-330

Readout error message should indicate channel

CM21-300

Add default secondary search mode for device read

CM21-754

device read uses primary address instead of secondary address

CM21-746

[Solved] In some cases CMi2110 fails on UH50 readout

CM21-740

[Solved] When UH50 meter readout fails, secondary address is not printed in log

CM21-511

Old readings in momreport when meter cannot be read

CM21-629

[Solved] Auto report does not send missing data

CM21-485

cron "* * * * *|* * * * *"

CM21-236

[Solved] cme2100 does not give feedback on cron pattern

CM21-674

Inform user that hardware version is not supporting USB functionality

CM21-668

Send report after reboot is now at info log level

CM21-624

Implement AT watchdog

CM21-565

Extended meter readout capacity on CMe2100LTE

CM21-658

[Solved] Command 'status uh50' hangs on non-UH50 equipped devices

CM21-590

Get an event if system time drifts too much in gateway between time synchronizations.

CM21-621

Default FTP time changed from -1 (no timeout) to 120 seconds to be consistent with other timeouts in the gateway.

CM21-619

Handle FTP servers not responding on QUIT command.

CM21-527

Support License for one meter

CM21-541

[Solved] Modify factoryreset response

CM21-524

[Solved] Update logmessage for UH50

CM21-496

[Solved] Phone number longer than 15 digits not authenticated

CM21-465

[Solved] SMS from phone numbers containing only text is rejected

CM21-466

[Solved] Some configurations can lead to significant time drift

CM21-474

[Solved] User-agent string sometimes contains no cell id on HTTP requests

CM21-423

Set overall timeout for TCP connections

CM21-428

Information about telnet commands executed missing

CM21-424

[Solved] Timeout is not set for HTTP connections

CM21-427

[Solved] Telnet console does not release connection

CM21-430

[Solved] Sometime dates are not rotated correctly at midnight

CM21-397

Reboot on network errors configurable

CM21-398

Trigger module reboot and resend report on exhausted report attempts

CM21-134

[Solved] Auto reports doesn't work

CM21-370

[Solved] Inconsistency between TDF and default value in config file(s)

CM21-402

[Solved] HTTP headers with spaces is not handled correctly

CM21-244

LTE support

CM21-256

Increase security level for performing factory reset

CM21-343

[Solved] M-Bus parser doesn't support US gallons (VIF extended code table)

CM21-353

[Solved] NTP time sync writes debug logs on info level

CM21-356

[Solved] Degree character not displayed correctly in logreport

CM21-389

[Solved] Support energy reported in MCal (VIF extended code table)

CM21-332

[Solved] Problems with report 3111 resolved

CM21-320

[Solved] Device fails to send SMS, introduced problem in 3.1.7

CM21-319

[Solved] SMS from device sometimes contains extraneous data

CM21-299

[Solved] Application version 3.1.5 does not start when date in module is too old

CM21-1

Add retries for timesync

CM21-177

New Report Templates *113 and *114

CM21-226

Remove daytime as default time server

CM21-227

Add NTP backup URL

CM21-264

Introducing more (debug) logging when performing timesync

CM21-282

Introducing AT command log

CM21-201

[Solved] M-Bus parser does not handle overflowing dates

CM21-42

[Solved] M-Bus report engine doesn’t care if VIF has FFXX-field

CM21-108

Timesync on UH50

CM21-169

New Report Templates

CM21-170

[Solved] Missing space in log message

CM21-176

[Solved] Getting “Syncing of UH50 clock enabled. Writing time to meter” message in 2100 and 2130

CM21-196

[Solved] Filter for M-Bus telegrams with space doesn’t work

CM21-107

[Solved] Add hard timeout for HTTP reports

CM21-118

[Solved] CMi2130 gen.3 does not read Iltron meter correctly

CM21-160

[Solved] Memory problem in CMe2100/CMi21xx (gen.3)

CM21-167

[Solved] Adding enhanced secondary addressing in database device add command is broken

CM21-81

[Solved] Unclear if time is updated by CMi2110 in UH50

CM21-94

More text in debug when new meter is added

CM21-95

[Solved] License information in log not correct when using CMi21x0 without M-Bus master

CM21-96

[Solved] Missing apostrophe in log

CM21-116

Increase minimum free disc space in CMe2100/CMi21xx (gen.3)

CM21-119

[Solved] Debug log write “using secondary addressing” when executing runbefore regardless of actual addressing mode

CM21-78

Reading of meters with different parity bits is now supported

CM21-45

FTPS is now supported

CM21-9

New command status support has been introduced

CM21-74

[Solved] Software cannot be updated because the disc space gets filled up by meter data.

CM21-49

[Solved] For some phones, commands which include the quotation signs (“) are not handled properly by the device

4591

The error message for report commands has been extended to provide more detailed information about the error

4575

All HTTP response codes in the 2xx range are now supported

4582

[Solved] Maintenance command does not guarantee removal of the oldest files

4559

[Solved] System log information is sometimes cleared after running the maintenance command

4484

The automatic APN configuration now supports SIM cards from IMSI number series 240075810xxxxxx

4127

New summary column has been added to status device list

4310

[Solved] Special characters (e.g. ‘@’ and ‘_’) in APN credentials are not handled properly

4474

[Solved] Storevalue command fails for CMi2110 when software is updated from version 3.0.5

4350

[Solved]

4026

[Solved] Read timeouts are not correct

4029

[Solved] Parsing meter acknowledge message (0xE5) can fail for some variants of meters

4001

Status ver command now displays full revision information

3994

[Solved] Elvaco contact details are incorrect in standard email report template

3990

[Solved] Unable to install meters (PQN:39471-1)