Technical specification
Elvaco Edge can be ordered for either Elvaco Play or Elvaco Evo. For Elvaco Play variants called Elvaco Edge Play, installation can be done using the Elvaco Play App. For Elvaco Edge with Elvaco Evo, the Elvaco Evo onboarding process is used for installation of Elvaco Edge. For more information on the different Elvaco Edge variants, see below table.
Table 2. Elvaco Edge Play variants
|
Item no |
M-Bus master |
Power source |
wM-Bus 868 MHz |
IP rating |
|---|---|---|---|---|
|
3000051 |
4T |
Battery |
IP55 |
|
|
3000067 |
4T |
Battery |
IP65 |
|
|
3000053 |
4T |
Battery |
Internal antenna |
IP55 |
|
3000060 |
4T |
Battery |
Internal antenna |
IP65 |
|
3000055 |
4T |
Battery |
External antenna |
IP55 |
|
3000062 |
4T |
Battery |
External antenna |
IP65 |
|
3000057 |
4T |
PSU 3W3.3V |
IP55 |
|
|
3000058 |
4T |
PSU 3W3.3V |
Internal antenna |
IP55 |
|
3000059 |
4T |
PSU 3W3.3V |
External antenna |
IP55 |
|
3000064 |
128T |
PSU 20W36V/3.3V |
IP55 |
|
|
3000065 |
128T |
PSU 20W36V/3.3V |
Internal antenna |
IP55 |
|
3000066 |
128T |
PSU 20W36V/3.3V |
External antenna |
IP55 |
|
3000061 |
* |
PSU 3W3.3V |
Internal antenna |
IP65 |
|
3000063 |
* |
PSU 3W3.3V |
External antenna |
IP65 |
*To keep the ingress protection rating of IP65, no M-Bus cable can be routed out of the enclosure for these variants.
Table 3. Elvaco Edge variants for Elvaco Evo
|
Item no |
M-Bus master |
Power source |
wM-Bus 868 MHz |
IP rating |
|---|---|---|---|---|
|
3000001 |
4T |
Battery |
IP55 |
|
|
3000025 |
4T |
Battery |
IP65 |
|
|
3000003 |
4T |
Battery |
Internal antenna |
IP55 |
|
3000010 |
4T |
Battery |
Internal antenna |
IP65 |
|
3000005 |
4T |
Battery |
Internal or External antenna |
IP55 |
|
3000012 |
4T |
Battery |
Internal or External antenna |
IP65 |
|
3000007 |
4T |
PSU 3W3.3V |
IP55 |
|
|
3000008 |
4T |
PSU 3W3.3V |
Internal antenna |
IP55 |
|
3000009 |
4T |
PSU 3W3.3V |
Internal or External antenna |
IP55 |
|
3000014 |
128T |
PSU 20W36V/3.3V |
IP55 |
|
|
3000015 |
128T |
PSU 20W36V/3.3V |
Internal antenna |
IP55 |
|
3000016 |
128T |
PSU 20W36V/3.3V |
Internal or External antenna |
IP55 |
|
3000011 |
* |
PSU 3W3.3V |
Internal antenna |
IP65 |
|
3000013 |
* |
PSU 3W3.3V |
Internal or External antenna |
IP65 |
*To keep the ingress protection rating of IP65, no M-Bus cable can be routed out of the enclosure for these variants.
The technical specification for Elvaco Edge depends on which variant that is of interest. For instance, electrical characteristics depend on if your are using battery driven gateway, or which kind of PSU that is in included in the product. See above table to understand what specification to read.
|
Mechanical |
Indoor enclosure |
Comments |
|---|---|---|
|
Enclosure material |
ABS |
|
|
Enclosure color |
White |
|
|
Ingress protection class |
IP55 |
Depending on Elvaco Edge variant. |
|
Dimensions (w x h x d) |
165x166x54 mm |
|
|
Weight |
~550-600 g |
Depending on Elvaco Edge variant. |
|
Mounting |
Wall mounted |
Bayonet mount or tray of the Elvaco Edge. Screws are not included. |
|
Maximum screw diameter |
4.5 mm |
|
|
Maximum screw head |
9 mm |
Only applies if mounting the tray of Elvaco Edge directly onto the wall. |
|
Alternative mounting kits |
DIN Rail kit (1100516), Pole mount kit (1100517) |
Pole mount kit for pole diameter 50-250 mm. Can be ordered seperately. |
|
External antenna connector for mobile networks |
MCX-f |
External antenna requires configuring Elvaco Edge to this using Elvaco OTC App. External antenna is not included. |
|
External antenna connector for wireless M-Bus |
SMA-f |
Requires an Elvaco Edge model prepared for external wireless M-Bus antenna. External antenna is not included. |
|
Mechanical |
Outdoor enclosure |
Comments |
|---|---|---|
|
Enclosure material |
PC/ASA |
|
|
Enclosure color |
RAL 7035 (grey) |
|
|
Ingress protection class |
IP65 |
Do not alter the enclosure or hardware, as this may impair the IP65 protection rating. |
|
Dimensions (w x h x d) |
165x166x54 mm |
|
|
Weight |
550-600 g |
Depending on Elvaco Edge variant. |
|
Mounting |
Wall mounted |
Bayonet mount or tray of the Elvaco Edge. Screws are not included. |
|
Maximum screw diameter |
4.5 mm |
|
|
Maximum screw head |
9 mm |
Only applies if mounting the tray of Elvaco Edge directly onto the wall. |
|
Alternative mounting kits |
DIN Rail kit (1100516), Pole mount kit (1100517) |
Pole mount kit for pole diameter 50-250 mm. Can be ordered seperately. |
|
External antenna connector for mobile networks |
N/A |
|
|
External antenna connector for wireless M-Bus |
SMA-f |
Requires an Elvaco Edge model prepared for external wireless M-Bus antenna. External antenna is not included. |
|
General |
Elvaco Edge |
Comments |
|---|---|---|
|
Real time clock backup |
24 h |
|
|
Real time clock accuracy |
< 2 s/day |
Requires network time support. |
|
Firmware update |
FOTA (Firmware-over-the-air) |
|
|
Meter data delivery |
MQTT-SN or LwM2M 1.1 |
|
|
Meter data delivery (via Elvaco Cloud) |
MQTT, HTTP (webhook), FTP & Email |
Support for CMe2100/3100 push reports format using the mentioned protocols. |
|
Cellular network |
Elvaco Edge |
Comments |
|---|---|---|
|
Mobile network |
LTE-M and NB-IoT |
LTE-M as default |
|
Supported radio bands |
3, 8 & 20 |
|
|
SIM card size |
Nano (4FF) |
Slide to insert |
|
Electrical characteristics |
Battery |
Comments |
|---|---|---|
|
Supply voltage |
38000 mAh 3.6 V |
|
|
Battery type |
2x D-Cells |
|
|
Battery weight |
220 g |
|
|
Battery lifetime |
Up to 16 years |
Battery lifetime is dependant on gateway settings and radio environment |
|
Mounting of battery |
Internally |
The battery is replaceable with an Elvaco recommended battery. |
|
Electrical characteristics |
CMip2110 (EoL) |
Comments |
|---|---|---|
|
Mains power supply |
Premounted cable |
|
|
Nominal voltage |
100-240 (+/- 10%) VAC |
|
|
Frequency |
50/60 Hz |
|
|
Power consumption (Max) |
3.8 W |
|
|
Power consumption (Nom) |
1 W |
|
|
Overvoltage category |
OVC II |
|
|
Max fuse rating |
10 A |
|
|
Pollution degree |
Degree II |
|
Electrical characteristics |
WM PSU 3W3.3V |
Comments |
|---|---|---|
|
Mains power supply |
Spring terminal (0.75-1.5 mm2) |
|
|
Nominal voltage |
100-240 (+/- 10%) VAC |
|
|
Frequency |
50/60 Hz |
|
|
Power consumption (Max) |
4.7 W |
|
|
Power consumption (Nom) |
0.5 W |
|
|
Overvoltage category |
OVC III |
|
|
Max fuse rating |
10 A |
|
|
Pollution degree |
Degree II |
|
Integrated M-Bus master |
M-Bus Master 4T |
Comments |
|---|---|---|
|
Interfaces |
M-Bus Master |
Screw terminal block (A-B) |
|
M-Bus standard |
EN 13757 |
|
|
Maximum unit loads (internal M-Bus master) |
4T/6mA |
For applications with requiring more than 4 meters, see subsection Option module 128T. |
|
Maximum number of wired M-Bus devices |
4* |
Theoretically 256 meters, but the internal M-Bus master only drives 4 M-Bus loads. |
|
M-Bus baud rate |
300, 2400, 9600 bit/s |
|
|
Nominal voltage |
26.5 V |
|
|
M-Bus search modes |
Primary, secondary |
|
|
Maximum cable length |
50 m |
|
|
M-Bus Master port (screw terminal) |
Cable area 0.25-1.5 mm2 |
*N.b! For maintaining IP65 compliance on Elvaco Edge Outdoor, the M-Bus cable must be routed through protective cable gland with an increased outer diameter of 3-6 mm. |
|
Electrical characteristics |
WM PSU 20W36V/3.3V |
Comments |
|---|---|---|
|
Mains power supply |
Spring terminal (0.75-1.5 mm2) |
|
|
Nominal voltage |
100-240 (+/- 10%) VAC |
|
|
Frequency |
50/60 Hz |
|
|
Power consumption (Max) |
25 W |
|
|
Power consumption (Nom) |
7.5 W |
Power consumption at 128T. |
|
Overvoltage category |
OVC III |
|
|
Max fuse rating |
10 A |
|
|
Pollution degree |
Degree II |
|
Environmental |
Elvaco Edge |
Comments |
|---|---|---|
|
Operating temperature |
-20 to +55 ºC |
|
|
Operating humidity max. |
5 to 90 % |
No condensation. |
|
Operating altitude range |
0 - 2000 m |
|
|
Pollution degree |
Degree 3 |
|
|
Storage temperature |
-20 to +60 ºC |
Prolonged exposure to high temperature reduces battery capacity. |
|
Type |
Elvaco Edge |
Comments |
|---|---|---|
|
LEDs |
6 RGB LEDs |
|
|
Push button |
Activation, deactivation, reg update, restart device |
|
|
Remote configuration |
LwM2M 1.1 |
|
|
Local configuration |
Elvaco OTC App (via NFC) |
ISO/IEC 15693 NFC tag containing NDEF compliant information. |
|
Option module |
M-Bus Master 128T |
Comments |
|---|---|---|
|
Interfaces |
M-Bus Master |
Screw terminal block (C-D) |
|
M-Bus standard |
EN 13757-4 |
|
|
Maximum unit loads (internal M-Bus master) |
128T/192mA |
|
|
Maximum number of wired M-Bus devices |
256* |
*Supports up to 256 wired M-Bus meters if connecting an external M-Bus master, see Elvaco Wired M-Bus Repeater at www.elvaco.se. |
|
M-Bus baud rate |
300, 2400, 9600 bit/s |
|
|
Nominal voltage |
36 V |
|
|
M-Bus search modes |
Primary, secondary |
|
|
Maximum cable length |
5 km (max 90 Ohm) |
|
|
M-Bus master port (screw terminal) |
Cable area 0.25-1.5 mm2 |
|
Option module |
Wireless M-Bus 868 MHz |
Comments |
|---|---|---|
|
M-Bus standard |
EN 13757-4 |
|
|
Supported modes |
T1, C1, S1 |
Default configuration: T1 + C1. |
|
Frequency bands |
868 MHz |
434 MHz available for testing. |
|
Maximum number of wireless M-Bus devices |
Over 1000 meters |
|
|
OMS compliant |
Yes |
OMS v.4 |
|
Compliance |
Elvaco Edge |
Comments |
|---|---|---|
|
RoHS Directive |
2011/65/EU |
|
|
Electromagnetic Compatibility Directive (EMC) |
2014/30/EU |
|
|
Low Voltage Directive (LVD) |
2014/35/EU |
|
|
Radio Equipment Directive (RED) |
2014/53/EU |
|
|
Environmental |
IEC 60529:2013 (Ed 2.2) EN 60529:2014 IEC 62368-1 EN 60950-22:2017 |
Comments (0 comments)