[en] Operation

[en] This information helps identify the gateway and verify that the correct device is being viewed or operated.

[en] *The Description field is optional and can be used to add manual information about the gateway. For example, the user can enter installation notes, internal references, or other information that helps identify the device.

[en] The signal strength regularly updates and the latest reported cellular signal quality for the gateway is presented. This can be used to verify whether the gateway has a reliable mobile connection.

[en] The timestamp below the signal strength value shows when the signal information was last updated.

[en] By selecting View more, the user can see historical signal information, including signal strength for the last 24 hours and the last 7 days.

[en] The Associated meters value shows how many meters are currently associated with the gateway. By pressing View all associated meters, a filtered view in the Devices tab with the associated meters will be shown.

[en] A gateway can be assigned to a location in Elvaco Play. This can be done both during commissioning but also during normal operation if no location has been assigned yet.

[en] A gateway can be assigned to a location in Elvaco Play. The assigned location view shows the location ID and address connected to the gateway.

[en] The gateway can also be unassigned from its current location when needed, for example if the gateway is moved to another spot.

[en] Meters connected to a CMe2100 LTE G2 gateway are not shown as separate devices under the Devices tab in Elvaco Play.

[en] Instead, installed meters are shown in the response when installing meters from the Elvaco Play app:

[en] The Mobile network details section displays cellular network information for CMe2100 LTE G2, such as:

[en] The phone number and APN can be edited if the mobile network configuration needs to be changed. Other network details are shown for identification and troubleshooting purposes.

[en] For CMe2100 LTE devices, configuration files can be managed from

[en] Organization settings > Device settings

[en] A configuration file, also called a CAD file, is used to combine multiple configuration commands into one file. Instead of manually sending each command using the Elvaco Play app, the user can sync the CAD file to the gateway and apply all settings at one instance.

[en] A CAD file uploaded to the organization can be used by all CMe2100 LTE gateways in that organization.

[en] In Elvaco Play, the CMe2100 LTE configuration files view lists the available CAD files for the organization. A new CAD file can be added by selecting Upload CAD file.

[en] To sync a CAD file to a gateway:

[en] CMe2100 LTE G2 can be uninstalled or reinstalled from Elvaco Play.

[en] Uninstall

[en] Use Uninstall when the gateway should be removed from the current organization in Elvaco Play.

[en] For CMe2100 LTE G2, uninstalling the gateway only removes it from Elvaco Play. The physical gateway remains active and continues running.

[en] If the gateway should also be uncommissioned and restored to a blank state, first send a factory reset command from the Elvaco Play app:

[en] After the factory reset command started has been received form the gateway, select Uninstall in Elvaco Play. This leaves the physical gateway in factory state and removes the gateway from the organization in Elvaco Play.

[en] Reinstall

[en] Reinstalling can be used when you want to factory reset the gateway and start over with a new commissioning flow. During the reinstall process, Elvaco Play automatically commissions the gateway again.

[en] The gateway page provides a snapshot of the current device state. This information is not updated automatically. It can only be updated manually when needed, by contacting Elvaco Support.

[en] Associated meters

[en] The Associated meters value shows how many meters are currently associated with the gateway.

[en] Signal strength

[en] The signal strength shows the latest reported cellular signal quality for the gateway. This can be used to verify whether the gateway has a reliable mobile connection.

[en] The timestamp below the signal strength value shows when the signal information was last updated.