Release notes
Release date: 2024-10-04
Notes: With this new firmware, it will be possible to utilize the pulse inputs of the CMi4140. This means two adjacent pulse meters can be connected, allowing highly cost-efficient solutions where e.g. a cold and a warm water meter with pulse outputs close to the CMi4140 (the heat meter) needs to be remotely read. The data from the pulse inputs can be accessed using either message format Pulse or Pulse Extended. Both message formats are scheduled. Complete description of the formats are available here:
Table 237. Implemented changes
|
ID |
Description |
|---|---|
|
MCM-6770 |
Added new message format "Pulse" |
|
MCM-6769 |
Added new message format "Pulse Extended" |
|
MCM-6613 |
Added support for reading FW/HW version and DevEUI over meter interface (KMP) |
|
MCM-5653 |
[Solved] Correctly identify module on meter requests, such as when using Kamstrup Meter Tool for meter configuration. |
Release date: 2021-06-14
Notes: Adding a new message format, Scheduled Extended+
Release date: 2020-02-12
Notes: Fixing a bug where the UTC offset could be lost at device reboot.
Table 239. Implemented changes
|
ID |
Description |
|---|---|
|
MCM-1371 |
[Solved] Used UTC offset lost at device reboot |
Release date: 2020-01-30
Notes: First commercially available FW release, adding some functionality not available in previous versions, and fixing some issues.
Table 240. Implemented changes
|
ID |
Description |
|---|---|
|
MCM-890 |
Activation via meter front buttons |
|
MCM-891 |
Added possibility to get module status via meter display |
|
MCM-926 |
Message format Heat Intelligence added (some times refferred to as Kamstrup format") |
|
MCM-1148 |
Shutdown module during low battery |
|
MCM-1037 |
[Solved] NFC status sometimes incorrect |
|
MCM-1070 |
[Solved] When date is unavailable the "DT" prefix is missing in NFC text record |
|
MCM-1187 |
[Solved] CMi4140 - 10 min in SF7 should be changed to 15 min. |
Comments (0 comments)