Configuration

Accessing encryption keys

The key to Elvaco Sense sensors is located in the elvaco.evo portal. Upon delivery, the customer receives an invitation to the elvaco.evo portal via E-mail, triggered by Elvaco.

  1. Go to http:// https://evo.elvaco.se.

  2. Claim your devices to your organization.

  3. See https://www.youtube.com/how to claim devices for more information about the claiming of devices.

Configuring settings via Elvaco OTC App (NFC)

The Elvaco Sense sensors are equipped with an NFC module, which can be used to configure settings or read data via a smartphone.

  1. Download “Elvaco OTC” application from Google Play or App store and install it on a smartphone or tablet. The smartphone/tablet device must support NFC.

    Elvaco_sense_OTC_app_on_android_.png

    OTC app on Android

    Elvaco_sense_OTC_app_on_iphone_.png

    OTC app on Iphone

  2. Enable NFC on the smartphone and start the application.

  3. Press SCAN and hold the smartphone on top of the sensors NFC antenna.

  4. To configure settings:

    1. Use the application to change any settings if needed.

    2. Hold the smartphone on top of the NFC antenna placement to transfer the new settings to the sensor.

    3. The blue LED will flashing in blue indicatesing that the settings have now been updated.

  5. To measure values:

    1. The first scanning will wake up the sensor and collect current meter value.

    2. Within 30 seconds, hold the smartphone on top of the sensors NFC antenna.

      The second scanning will show the current meter value.

Was this article helpful?

0 out of 0 found this helpful
Have more questions? Submit a request

Comments (0 comments)

Article is closed for comments.