Product overview
CMi6160 comes with a wide feature set, with the possibility to adapt its function based on your specific metering project. Some of the key features include:
-
IoT-ready: As soon as the meter connectivity module has been mounted and activated, it will automatically initiate transmission of meter data, without any manual steps needed. The CMi6160 is prepared for seamless integration with all leading IoT platforms.
-
Battery operated: Thanks to its efficient power usage, CMi6160 can be battery operated for up to 13 years with daily transmission of meter data.
-
One-Touch Commissioning: The product uses the Elvaco One-Touch Commissioning (OTC) to configure and deploy products quickly and securely. Using the Elvaco OTC App, simply enter your desired settings and place your mobile phone in the upper left corner on the front side of the SHARKY or SCYLAR meter. New settings will be applied instantaneously via NFC. With FW ≥ 1.3.2, the module can be configured to be activated based on detection of water flow.
-
Flexible message scheme: CMi6160 has different message formats to choose from, making it easy to setup the device for your specific metering project.
CMi6160 is compatible with Diehl SHARKY 775 and SCYLAR 548 meters with a compatible firmware version. Once the module is mounted and starts up, a compatibility check is made to ensure that it is compatible with the meter firmware. If the module is mounted in an incompatible meter, this is indicated in the Elvaco OTC App.
The power for CMi6160 is supplied via an external battery pack, unrelated to the power supply of the meter.
Below table shows the minimum meter firmware required for compatibility with CMi6160.
Table 53. CMi6160 - Meter firmware compatibility
|
Meter |
Minimum required meter FW |
|---|---|
|
Diehl SHARKY 775 |
FW version FW02 |
|
Diehl SCYLAR 548 |
FW version FW02 |
Comments (0 comments)