Installation of CMi2110 in UH50.

Symptoms 
When installation of a CMi2110 is done in a UH50 meter a jumper should be mounted on the CMi2110 if possibly.
 
Purpose 
If possibly a jumper should be mounted to enable fast communication with the UH50.
 
Resolution 
If the UH50 firmware is greater than 5.17 the jumper should be mounted to enabled fast communcation with the meter

Was this article helpful?

1 out of 1 found this helpful
Have more questions? Submit a request

Comments (0 comments)

Article is closed for comments.